MULTICHANNEL PROCESS CONTROLLER
TYPE: EXPANDABLE (WITH UNIVERSAL INTERFACE MODULE)
VERSION: IP65 ENCLOSURE TRANSPARENT COVER
INPUT: 8 CHANNELS FOR UPTO 8 UNITS
POWER SUPPLY: 85-255 V AC
OUTPUT: DISPLAY AND RS 485
VSKU: PRC-28A-1 MULTICONT
Multichannel Process Controller
A common interface between the HART®-enabled intelligent level transmitters from NIVELCO and the other components of the process control system, such as the PCs, PLCs, displays, and actuators, is provided by the MultiCONT (MULTICHANNEL PROCESS CONTROLLER) unit. In addition to serving as an interface, the MultiCONT controls intricate activities while ensuring that the 2-wire transmitters are powered. A maximum of 15 regular or 4 Ex ia certified NIVELCO HART®-capable 2- and/or 4-wire transmitters can communicate with the MultiCONT device.
The maximum number of transmitters in a loop when using MultiCONT with NIVELCO's MicroTREK or PiloTREK microwave level transmitters should not be more than 6 pieces for regular transmitters and 2 pieces for Ex version transmitters. More MultiCONT units can be connected in series through an RS485 line if a system has more transmitters than a single MultiCONT unit is capable of handling. The MultiCONT allows for the remote programming of the transmitters as well as the downloading of the settings and measured data.
The commissioning of a process control system made up of any HART®-based intelligent (level, temperature, or pressure) transmitters is adaptable thanks to the Universal Process Controller.
Easy 6-button programming
Trend logging into internal memory or an SD card
USB connector for downloading data from internal FLASH memory
Easy 6-button programming
Galvanically isolated transmitter outputs between 4 and 20 mA
Depending on the transmitters' kind 1 to 15 channels (standard) or 1 to 4 channels (Ex ia)
Large LCD or OLED panel with 128 × 64 pixels that is extremely informative
A version that is naturally safe
Transmitter power supply voltage - 30 V DC / 60 mA
Display - 128 x 64 dot-matrix
Relay - Max. 5 pcs. SPDT 250 V AC, AC1, 5 A
Analog output - Max. 2 pcs., galvanically isolated 4 – 20 mA, max. load of 500 Ohm, with overvoltage protection
A number of powered transmitters - Max. 15 pcs. standard, or max. 4 pcs. Ex ia
RS485 interface -
”user” - Galvanically isolated, HART® / Modbus® protocol
”module” - Galvanically isolated, HART® protocol
Logger unit - Capacity: FLASH = 65 000 entries; SD card = depends on the card! (max. 64 GB)
Housing material - Polycarbonate (PC)
Mounting Wall - mounted
Ambient temperature - -20 °C … +50 °C (-4 °F … +122 °F)
Ingress protection - IP65
Electrical protection - Class I / III
Mass - 0.9 kg (1.98 lb)
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press and then Add to Home Screen.